Have you decided to buy a wire feed welder? Looking for high-quality, portable and expensive wire feed welder? Then, why you didn’t buy Hobart 500559 Handler Wire Welder because this is a compact wire feed welder results in high-quality. You can operate this MIG welder on 115 V household power.
Keep continue to read this review to find more about this welder to ensure the right decision.
Features of Hobart 500559 Handler Wire Welder:
Here are some of the key factors of Hobart 500559 Handler Wire Welder to know more.
1. Easy to set-up
This wire feed welder requires some setting but takes only a few seconds to set-up. And, it is very easy to set up and use and even starter also feel free to use this welder. It comes to hand with a manual guide for set-up and there is no need for additional tools to operate.
The Hobart 500559 Handler Wire Welder is more versatile for a welder who wants to make use this auto body and household repairs. Apart from that, this is compact, portable and high-quality welder too.
3. Voltage control
This is designed with 5-position voltage control selector, so you can fine tune the arc for all thicknesses.
The welder is built up with an industrial cast aluminum drive system and a heavy duty work clamp. So, this is the perfect choice to get industrial performance.
5. Multiple applications
You can use this welder for multiple applications such as mower decks, trailer frames, tool carts, gun racks, garden equipment, PTO attachments, auto bodywork, and like more.
The capacity of this Hobart 500559 Handler Wire Welder is, it welds 24 gauge up to ¼ inch mild steel.
In order to use this welder for all applications, you need to buy a welder that offers 140 to 160 amp output. The Hobart 500559 Handler Wire Welder offers maximum output amp as 140, so any welder can buy this wire feed welder for any applications.
Hobart 500559 Handler Wire Welder Specification:
- Brand: Hobart Welder
- Item model number: 500559
- Style: Welder
- Power Source: corded-electric
- Installation Method: MIG-welding
- Number of Handles: 1
- Batteries Required: No
- Duty cycle: 20% at 90 amps
- Weighs: 57 lbs.
- Output amperage: 25 to 140
What’s in the box?
The Hobart 500559 Handler Wire Welder is packed with the following items.
- Handler 140 with built-in gas valve
- 10 ft. MIG gun with liner
- Dual gauge regulator and gas hose
- 10-ft work cable and clamp
- 10-ft power cord
- Extra .030 contact tips
- Sample spool of .030 flux-cored wire
- 8-inch spool adapter
- Owner’s manual
- Set-up guide
- It is very easy to set up and use.
- This is coming to your hand with 5 years limited warranty.
- You can use this for any applications.
- It allows to fine tune the voltage control.
- It very easy for transportation.
If you’re looking for wire welder for your DIY project and money is not a matter, then Hobart 500559 Handler Wire Welder is the best buy.